Microbiological Quality

Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi port valve. It is fitted with automatic pressure control switch, (indfoss piezostat), safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of S.S. 304 with water level cut-off device & Digital Temperature controller Cum Timer. Optional: Double Door Vacuum Breaker Valve Calibration Port Safety Alarm Specially designed Electronic Lid locking system to make sure lid is locked properly Single channel data logger system (Only with Automatic Model) Printing System with Thermal Printer (Only with Automatic Model) 21 CFR Software (only with touch screen model) Automatic System OR Microprocessor Based Automatic Touch Screen Display System         Also Look for  AUTOCLAVE (HORIZONTAL RECTANGULAR) FULLY AUTOMATIC AUTOCLAVE

Inner chamber is made of thick Stainless Steel (304). Outer body is made of thick Mild Steel / Stainless Steel 304. The chamber is absolutely leak proof and can be operated at any Selected point in between 5 to 20 pounds per sq. Inch. It is provided with pressure gauge, pressure release valve, S.S. Basket, safety valve, water level indicator with cord, Plug & Pressure Control Switch. It is provided with Radial Locking System with Automatic Water Level cut off device for element as a safety feature and Digital Temp. Controller Cum Timer. Temperature Range 121ºC                   Optional: Vacuum Breaker Valve Calibration Port Safety Alarm Specially designed Lid locking system to make sure lid is locked properly Single channel data logger system (Only with Automatic Model) Printing System with Thermal Printer 21 CFR Software Automatic System (Only for Normal Autoclave Vertical Model)

Double walled, Inner chamber made of Stainless Steel 304. Outside Mild Steel painted in epoxy powder coating / stainless steel 304 with wire mesh adjustable shelves, two indicators and on /off switch to work on 220/230 volts A.C. Heating elements are placed in ribs at the bottom and sides. Temperature range Ambient Temp. +5°C to 70°C. The door has synthetic rubber gasket. With one number Air circulating Fan & Microprocessor based PID temperature controller. Specially Designed to maintain 37°C temp.   OR ANY NON-STANDARD SIZE Optional: Special heavy duty air circulating fan system. Microprocessor based touch screen display system with Pen Drive for data logging, printing through PC communication & saving of data in PC Online transfer of data without any cable/wire Interference 21 CFR software (for non-editable data)     Also Look for BACTERIOLOGICAL INCUBATOR (TOUCH SCREEN MODEL)  DOUBLE DECKER BACTERIOLOGICAL INCUBATOR        

Applications include isolation and identification of plant/human pathogens, work in virology, tissue culture, sterility testing and recombinant DNA research. This Biohazard Cabinet offers operator protection from low to moderate risk biological agents (or chemical carcinogens), while providing a sterile work environment for the procedure. The cabinet is kept under negative pressure with partial quantity of recirculated air exhausted through a HEPA filter. External exhaust from the laboratory is optional. The Biological Safety Cabinet is similar in performance and specification to the Vertical Series, described in Laminar Air Flow. The additional main features are as under:- Specially suited for Pathogenic work, chemical work, critical biological work involving virus and pathogens & for microbiology, biochemistry etc. Standard S.S. Perforated table. Imported Mini Pleat HEPA of 0.3 µ of an efficiency of 99.97% down to 0.3 micron. Media is of glass fiber & made of pleats back & fro in an anodized aluminum

“OPTICS TECHNOLOGY” Class III Bio safety cabinet offers the highest level of operator, product and environmental protection from infectious/biohazardous aerosols and is suitable for microbiological work. Designed for an absolute level of containment, it is frequently used for work involving the deadliest bio-hazards. A Class III cabinet is defined as a totally enclosed, ventilated cabinet with leak-tight construction it is also called glove boxes. The cabinet is maintained under negative pressure and supply air is drawn in through HEPA filters. A supply of HEPA filtered air provides product protection and prevents cross contamination of samples while exhaust air is HEPA-filtered and incinerated. Key Benefits: Safer dual main with 100% exhaust filters Exclusive dual main exhaust filters provide > 100.000 times better protection than single-stage designs. An integrated pass-through with interlocking doors permits materials transfer without risk of environmental contamination. An angled cabinet front ensures a comfortable working posture. Energy Efficient

Inner chamber is made of thick stainless steel (304). Outer body is made of thick Mild Steel Duly Powder Coated / Stainless Steel 304. The chamber is absolutely leak proof and can be operated at any Selected point in between 5 to 20 pounds per sq. Inch. It is provided with pressure gauge, pressure release valve, S. S. Tray, safety valve, water level indicator with cord, Plug & Pressure Control Switch. It is provided with Radial Locking System with Automatic Water Level cut off device for element as a safety feature and with Digital Temperature Controller cum Timer.   Optional : Vacuum Breaker Valve Calibration Port Safety Alarm Specially designed Lid locking system to make sure lid is locked properly Single Channel Data Logger System (Only with Automatic model) Printing system with thermal printer 21 CFR Software Automatic System OR Microprocessor Based Touch Screen Display system        

Electrically heated, complete with stand single walled Aluminum Body/Stainless Steel 304 along with essential parts like pressure gauge, Safety valve etc.         Also Looks for PORTABLE AUTOCLAVE WITH (DIGITAL TEMP. CONTROLLER CUM TIMER)