This machine uses steam based process for complete sterilization of cans and bottles after sealing. It is provided with pressure gauge, safety valves, Thermometer, and release valves.

Manual capsule counting machine is used to count number of capsule to be filled in a container used for any size of capsules. Aluminium/S.S. 304 Body.

We offer 100 to 300 holes, manually operated made up off stainless steel 304 mainly used to fill powder in hard gelatin capsules. Optional : Spare loading plate for 100 OR 300 holes

Carbon sulphur apparatus is used to detect percentage of Carbon and sulphur in iron and steel. The scale of apparatus burette is directly calibrated in terms of carbon percentage. The apparatus can detect carbon percentage up to 4.5%. By using interchangeable burettes, the measurement can be taken to 0.25%, 0.5%, 1.5% and 4.5%. Heavy duty polished wooden frame with best quality clamps to hold glass parts. Furnace outer body M.S. sheet duly powder coated having temp. control box with pyrometer / digital temp. controller. Supplied with glass parts absorption vessel & Acid Jar, Combustion Boat etc. Available in two models:

Cement Autoclave comes with great accuracy and is a cost-effective model for conductive accelerated soundness test of the cement. Double Walled with six glass wool insulation mounted on a sturdy supporting frame. The attached control unit is enclosed by a Microprocessor based PID controller, pressure gauge and spring-loaded safety valve of brass.

Inner Chamber SS-304, Outer MS duly Powder Coated/S.S. 304 Size of water bath : 7" x 11" x 7" Temperature range: Ambient +5°C to 50°C Provided with variable speed regulator to control the speed of circulation. With Microprocessor based PID Controller with an accuracy of ±0.5°C.         Also Looks for CIRCULATING WATER BATH  

Thermostatically Controlled Inner Chamber SS-304, Outer MS duly Powder Coated/S.S. 304 Size of water bath : 7" x 11" x 7" Temperature range: Ambient +5°C to 50°C Provided with variable speed regulator to control the speed of circulation. Temp. Accuracy ± 2°C.   Optional: Microprocessor Based P.I.D. Controller with an accuracy of ± 0.5°C.         Also Looks for MICROPROCESSOR BASED CIRCULATING WATER BATH

These are overhead clean air modules mounted on roof or with steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling/Dispensing of Raw Material, Basic Compounds, Active Compounds, works on the principle of laminar air flow with HEPA Filters & Pre-Filters. Static pressure manometer. Available in Wooden / M.S. body duly powder coated / Stainless steel body.   Optional: Magnehelic Gauge

Cleveland Flash and Fire Point Apparatus is determine of flash and fire points of petroleum and other liquids except Fuel oils and those materials having an open cup Flash 79ºC to 400ºC. Electrically Operated heater with Temp. regulating device. Heating is regulated by Energy Regulator. Operates on 220 V AC mains.

WITH HEATING MENTAL To know chemical constituents of vegetable material extraction, procedure is followed which provide efficient extraction and limits the decomposition of extracted compound.

Optional : Calcium or Lithium Filter

  Also Look for CLOUD & POUR POINT APPARATUS WITH DIGITAL TEMP. INDICATOR CLOUD & POUR POINT APPARATUS (REFRIGERATED)  

  Also Look for CLOUD & POUR POINT APPARATUS CLOUD & POUR POINT APPARATUS (REFRIGERATED)

  Also Look for CLOUD & POUR POINT APPARATUS CLOUD & POUR POINT APPARATUS WITH DIGITAL TEMP. INDICATOR

A state of the Art Co2 Incubator. Non dispersive Infrared Co2 Sensor. Advanced design provides a very stable drift-free output requiring less frequent calibration. With S.S. 304 Pan placed in the bottom of chamber to be filled by distill water to achieve Humidity Relative Humidity level up to 95%. Air Jacketed Humidity With Silicon Gasket LCD Controller 3 Program's : Temp. & Time based Front Door made of Toughened Glass Normal Working Light     Optional : Co2 Cylinder, Pipe, Regulator

Mainly used for sugar coating tablet the complete system fitted with suitable motor, blower, piping and nozzle for hot air flow. M.S./S.S. Body

Coating Thickness Gauge is a digital way to indicate the depth of coating such as paint. This coating thickness gauge is to be used to measure dry film thickness in a non-destructive way.      

The test is used for determining liquid absorptiveness or resilience of treated and untreated paper, board, fabrics and other sheet materials. The test consists of a test apparatus, its 10 kg roller and blotting paper. The roller method is recommended to insure better consistency and reliability that can be obtained by manual blotting or rubbing the specimen.    

Heating block type Temperature range from 5 °C above ambient to 150 °C ± 1 °C. Designed with glass reactions vessels and air condensers. Supplied with stand to accommodate vessels Operate on 230 volts, 50 Hz, single phase. With Digital Temperature controller cum digital timer along with glass parts. Or any other Size on Request.

Basically used to reduce particle size during homogenizing, mixing emulsifying, dispersing etc. Material is process between high speed rotor and stator in colloid mill made up of SS stainless steel 304 material should be feed in a cone shaped hopper and also very quick and easy cleaning just by flushing water or any other suitable solvent.

The improved colony counter reveals colonies of bacteria clearly against a dark background. The illumination is brighter and completely uniform. This principle increases the contrast between the colonies and the culture medium. It improves the visibility so those tiny colonies can be seen. As a result, the observer works efficiently and obtains accurate data quickly. Body is made of M.S./S.S. 304. S.S. 304 BODY AS PER GMP IS ALSO AVAILABLE   Also Looks for AUTOMATIC COLONY COUNTER 

Spectral colorimeter are economical models to measure the color difference. Instrument is with auto calibration to make it simple in operation. It contains 30 kinds of parameters and 26 kinds of Illuminantes.   Also Looks for COLOUR MEASURING DEVICE IMPROVED MODEL

Colour Measuring Device comes with Camera to view the measurement area the user can clearly see the measurement area to avoid measurement errors, optical engine which creates the best measurement repeatability. LED light source is provided. Instrument adopts automatic gloss compensation technology which guarantees the accuracy of color measurement value for surfaces of different gloss. It could be used for color matching for many industries and widely used in textile industry, painting industry, plastic industry, food industry, building material industry and other industries for color quality control.   Also Looks for COLOUR MEASURING DEVICE ECONOMICAL MODEL

Single point manual calibration   Also Look for DIGITAL CONDUCTIVITY METER MICROPROCESSOR BASED CONDUCTIVITY METER DIGITAL CONDUCTIVITY AND TDS METER COMBINED TDS METER DIGITAL (Pocket Type)

Tester aims to achieve the application and inspecting on oil quality, save cooking oil and ensure the safety of cooking oil. It is able to test total polar material (TPM) values in minutes and suitable for all kinds of cooking oil within high operation temperature. TPM is considered as the percentage level at which frying oil is no longer suitable for human consummation.

A Separator is a centrifugal device that separates cream from milk. “Optics Technology” cream separator is made-up of high-grade stainless steel mounted on a plastic body operated manually. Capacity: We can customise from 60-1000 ltrs. / hours Application: Dairy Industry

A wide range of Stainless Steel Cross Over Benches that is widely used in various industries. This Crossover Bench demarcates the line between the slightly soiled changing-zone on entry side of the changing room and the cleaner area in front of the entry to the clean room. It is made up of high quality Stainless Steel raw material. It is available in different sizes, or as per client's specifications and requirement.     Our range are given below : Single Side Entry 2 sides Entry with / without locker Perforated Shelf

Crown Corking Machine suitable for sealing crown corks on glass bottles. The hand operated crown corking machines and can be used with a variety of bottles ranging from 200 ml to 1 liter for a standard crown neck of 28 mm. These are highly appreciated for their easy operation. Note : Pedestal Model also available

Crush Testers are designed for performing Ring Crush Test (RCT), Edge Crush Test (ECT), Flat Crush Test (FCT), Pin Adhesive Test (PAT), Concora Medium Test (CMT), Corrugated Crush Test (CCT) and other general compression tests, on a variety of materials like paper, paperboard, etc. These multi-functional equipments incorporate high accurate load cell and precise ball screw, which drives the compression platen steadily along the guide track to compress the specimen.    

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Note: Size are also customized The tank has been designed to accommodate cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 27°C ± 1°C, and expect for the 15 minutes after immersion of the freshly made specimens. As per comply IS 269 & IS 516 (Methods of tests for Strength of Concrete) after the period

Basically used in scientific research, teaching, medicine and petroleum chemical industries.

Handle : Yes Power-on (Indicator Light Green) : Yes Number of Gasket : 1 Temp. controlled by Microprocessor based Temp. Controller  (Digital LED Display) Eco friendly refrigerant CFC free Heavy Duty Compressor     NOTE: Kindly select the Model No. between A, B & C   Also Look for DEEP FREEZER (VERTICAL) (-20°C/-40°C) DEEP FREEZER (VERTICAL) (-80°C)

“State of Art Technology” Puff Insulated to Prevent Thermal Losses. Specially Designed Combination of Fixed & Pull Out Drawer System for Storage, Temp. Controller, Fast Freeze Button & Lamp, Very Low Noise, Plastic Body, Solid Door & CFC Free Heavy Duty Compressor, Wheels on Rear Side. Works on 220V AC / 50 Hz Mains. Temp. controlled by Microprocessor based Temp. Controller Eco friendly refrigerant CFC free Heavy Duty Compressor     NOTE: Kindly select the Model No. between A & B   Also Look for DEEP FREEZER (HORIZONTAL) DEEP FREEZER (VERTICAL) (-80°C)

Puf insulated to prevent thermal losses Eco friendly refrigerant CFC free Heavy Duty Compressor Temp. controlled by Microprocessor based Temp. Controller (Digital LED Display) Very low noise Lock & key arrangement Door is sealed with Silicon Gasket Heavy duty Castor Wheels Mounted for easy movability Works on 220 VAC / 50Hz Mains.     Also Look for DEEP FREEZER (VERTICAL) (-20°C/-40°C) DEEP FREEZER (HORIZONTAL)  

Body is made of S.S. 304 / M.S. Duly Powder Coated. Designed to remove excess moisture from the Atmosphere where manufacturing activities of Tablets, Capsules & electronic parts are performed. These are also useful to maintain the quality of precision Equipment's & instruments where accuracy of Humidity is counted. Humidity is brought down upto 40% Accuracy ±3% RH. Humidity is controlled by special “Honeywell USA” humidistat with Hermetically sealed Compressor. Castor wheel mounted body makes the unit very easily movable. With Pre Filter     Optional: Digital Humidity Controller Voltage Stabilizer   Also Looks for DEHUMIDIFIER (WITH DIGITAL HUMIDITY CONTROLLER)

CFC Free Compressor Body is made of S.S. 304 / M.S. Duly Powder Coated. Designed to remove excess moisture from the Atmosphere where manufacturing activities of Tablets, Capsules & electronic parts are performed. These are also useful to maintain the quality of precision Equipment's & instruments where accuracy of Humidity is counted. Humidity is brought down upto 40% Accuracy ±3% RH. Humidity is controlled by digital humidity controller with Hermetically sealed Compressor. Castor wheel mounted body makes the unit very easily movable. Automatic Humidity controller is able to show desired value of humidity and actual value shown in the upper part of display. It show accurate result. With Pre Filter     Optional: Voltage Stabilizer   Also Looks for DEHUMIDIFIER

It consist of an inbuilt prefilter & very high exchanging capacity non-corrosive CATION & ANION Resin, columns prefilled with imported Resins for efficient results having treated water parameters. Fitted with a sturdy PVC multi control valve & can be connected direct to water taps. Fitted with analog / digital conductivity meter. Supplied with one plastic chemical proof regeneration tank & the complete unit is housed in a painted M.S. trolly for easy mobility.    

  Also Looks for DIGITAL THIN FILM MEASURING GAUGE

BOMB IS MADE OF SS 316 Temp. Accuracy ± 0.01˚C Bomb Calorimeter outfit provides a simple and inexpensive method for determination of heat of combustion of organic matter and the calorific value of solid & liquid fuel. The outfit supplied is complete for analysis as per the method recommended by British standard institution BS 1016. All parts of the outfit have been finished of petroleum and British Standard Institute. Optional: Automatic Gas Filling System Oxygen Cylinder   Also Looks for AUTOMATIC BOMB CALORIMETER 

This instrument is used to check the density of powder.  Can Hold 2 No. cylinders, capacity : 100 ml.  Based on and tapping mechanism, User has to select the No. of stokes in the counter  Three models are available as given below Meet USP Standards.   BODY IS MADE OF MILD STEEL DULY POWDER COATED / S.S. 304   Also Looks for AUTOMATIC BULK DENSITY APPARATUS

Also Look for DIGITAL CONDUCTIVITY METER MICROPROCESSOR BASED CONDUCTIVITY METER CONDUCTIVITY METER DIGITAL (Pocket Type) TDS METER DIGITAL (Pocket Type)

Also Look for CONDUCTIVITY METER DIGITAL (Pocket Type) MICROPROCESSOR BASED CONDUCTIVITY METER DIGITAL CONDUCTIVITY AND TDS METER COMBINED TDS METER DIGITAL (Pocket Type)  

The apparatus is suitable for testing of Dissolution rate of tablet and capsule, it consists of main transparent acrylic tank housing. Thermostatically/ Digitally controlled immersion heater, drain cock and transparent hemispherical unbreakable vessel. The base unit is made of chemical resistant powder coated sturdy frame housing, Control panel which includes Electronic regulator and thermostat. An electronic motor is mounted on chrome plated rod, operates Paddle/Basket. (Body is Available in M.S. / S.S. 304).   Optional: Digital RPM Indicator Digital Timer Microprocessor Based PID Controller   Also Look for DIGITAL DISSOLUTION RATE TEST APPARATUS (6 STAGE) MICROPROCESSOR DISSOLUTION RATE TEST APPARATUS

The unit is equipped with acrylic water bath controlled by digital temperature controller which is normally set at 37ºC and duly fitted with pump which recirculates the water thus maintaining homogeneous temperature. The acrylic water bath is with digital timer can be set ranging from 1 to 999 minutes add it "BEEPS" at the end of the set time. The unit is equipped with Digital setting of RPM as an optional which can be controlled from 25 to 150 RPM. The equipment is duly fitted with motorized lifting to facilitate easy operation of the stirrers' assembly. Digital dissolution rate test apparatus is equipped With Digital RPM Indicator - Range 25 to 150 RPM Digital Timer – Range 1 to 999 minutes Digital temperature indicator – Range 30ºC to 50ºC Body is available M.S. / S.S. 304 Also Look for MICROPROCESSOR DISSOLUTION RATE TEST APPARATUS DIGITAL DISSOLUTION RATE TEST APPARATUS

A solution of the salt is aspirated into the LPG-AIR flame. The vapour takes up energy from the flame and emits the wavelength characteristic colour of the element being tested. The intensity of emitted light is proportional to the concentration of the metal ion in the solution.

(Front Loading with Auto Discharge Type Loading and unloading of tablets without removing Drums) Also Looks for TABLET FRIABILITY TEST APPARATUS

  Also Looks for DIGITAL GLOSS METER (SINGLE ANGLE)

The surface luster meter for printing ink, bake lacquer, coat, woodwork, construction decoration materials like marble, granite etc, plastic, sheet and other non metal materials.   Also Looks for DIGITAL GLOSS METER (3 ANGLE)

  Also Look for MELTING POINT APPARATUS DIGITAL MELTING POINT APPARATUS WITH SILICON OIL BATH DIGITAL MELTING POINT APPARATUS WITH TFT DISPLAY

Cylindrical Silicon Oil Bath Built in Magnetic Stirrer with Electronic Speed Controller Electronic Controller for Adjusting Heating Rate Digital Display of Temperature Glare - Free Background Light with Adjustable Light Intensity Provision for Holding the Melting Point Display Temperature Range 2°C above Ambient to 275°C, Readability 0.1°C   Also Look for DIGITAL MELTING POINT APP MELTING POINT APPARATUS DIGITAL MELTING POINT APPARATUS WITH TFT DISPLAY

With Visual Display Screen Designed for accurate measurement of melting point and for checking melting range in solid samples. Also Look for DIGITAL MELTING POINT APP DIGITAL MELTING POINT APPARATUS WITH SILICON OIL BATH MELTING POINT APPARATUS

  Also Look for  pH METER DIGITAL (POCKET TYPE) DIGITAL pH METER MICROPROCESSOR BASED pH METER

Also Look for  DIGITAL pH AND CONDUCTIVITY METER COMBINED pH METER DIGITAL (POCKET TYPE) MICROPROCESSOR BASED pH METER