These are specially designed to meet laboratory requirement of convenient stirring in flask with simultaneous uniform heating by heating mantles. These have two tier constructions with the upper compartment consisting of heating element. Accurate stepless speed control allows smooth variation up to 1200 RPM. Heating energy is controlled by energy regulator.

Optional : Digital Timer

Rotates specimens in horizontal plane in 3/4” circles, constructed of mild steel finished with stoved enamel point, Turned up edges and rubber sheeting on platform to prevent slipping of specimen containers, platform rigidly supported by steel legs for smooth and silent rotation, mounted on four rubber suction feet to prevent creeping. OR Any Non Standard size as per requirement Optional: Digital R.P.M. indicator Digital Timer  

“Optics Technology” Rotary Tablet Machine is enclosed machine i.e. top half (Compression Zone) with S.S. hood & acrylic cover & the lower half of the machine is covered with malt finish S.S. cover. Application: Tableting of pharma / ayurvedic, color (crayons) food industries, agricultural industries, camphor and confectionary products. Also Look for TABLET MAKING MACHINE (MOTORISED) TABLET MAKING MACHINE (HAND OPERATED)

The apparatus consists of an evaporating flask by DC motor in a heating water bath. Vacuum Distillation of solvent at high and low temperature is achieved quickly and efficiently by use of a variable speed motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere. The evaporating flask is pear shaped to give a large surface area of evaporation and is clamped to a glass duct, which goes through the drive unit and produced into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask the unit is fitted with quick action. Optional: Water Bath Thermostatic OR Water Bath Microprocessor Based PID Controller Vacuum Pump (Oil Free Diaphragm Type) Digital RPM Indicator Micro Attachment Set Automatic Motorized Lifting Arrangement Chemical Resistance Vacuum Pump (Oil Free) Cooling Water Bath (Chiller Circulator) PID Controller

These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters. This will act as a CLASS 100 Room. Protection of the personnel in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperse in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work. Optional: Timer for

Is made up of Stainless steel 304/316 having cavation on different place to collect samples.

Disposal Machine is used to destroy soiled Sanitary Napkins both scientifically and hygienically. The Unit is Easy to operate & maintain and can work automatically on preset cycle every day. Optics Technology Sanitary Napkin Disposal Machine is lightweight and can be fixed on the wall with easy installation for the convenient use in the Toilets. The ash is collected in a tray located at the bottom of the Incinerator. Optics Technology Sanitary Napkin Disposal Machine is having and emission outlet outside the room for the fumes developed during the incineration. The Machine can also be installed inside the room with SMOKE REMOVAL UNIT (Optional) with absolute zero emission. Low Power Consumption and can work on Inverter.   Optional: 1. Exhaust System

The Scorched Particle Tester is determined in powder by comparison with ADMI Chart Scorched Particle Standards for Dry Milk. This Machine is for Milk Powder and all other dried Dairy Products. With 50 No. Spare sedimentation disc.   Note : Spare sedimentation disc of Scorched Particle are available on order

Scratch Hardness Tester is an instrument which is used to verify the surface hardness of paint and varnish coatings with respect to their scratch resistance capacity. Commonly used in laboratories for quality control and experimental purposes for various fields like Paint, Ink, Oil, and Petroleum & Powder Coating Industries.  

Sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) is commonly used to obtain high resolution separation of complex mixtures of proteins. The method initially denatures the proteins that will undergo electrophoresis.

Secure seal tester is designed to check bottle and closer thread integrity and seals strength mostly used in carbonated drink manufacturing unit.

The Sedimentation Shaker is high tech system used by various Industries to determine the quality of gluten in any given wheat sample. The System has a Digital LED Timer which glows to indicate the system active. This is an efficient system that helps to determine protein quality and insect damage in wheat. Provided With Sedimentation 4 Nos. Glass Cylinder’s with stopper. Optional : Digital Timer

Body and inner parts are made of brass   Also Looks for SEED DIVIDER – GAMET / PRECISION TYPE

  Also Looks for SEED DIVIDER – BOERNER TYPE

Mainly use for testing moisture content in seeds to ensure long self life. The result are displayed on screen it is very simple to operate and high accuracy.   Also Looks for DIGITAL SEED COUNTER

Samples from bulk lots are taken with a double tube compartment bulk grain probe. Made of nickel plated brass.  

The Cryostat is ergonomically designed keeping in view user needs and safety. Optimized with cooling system with double compressor for rapid specimen freezing and smooth precise orientation that gives high quality sectioning in histology with section thickness range 1-60µm, trimming thickness range 30µm - 95µm, with freeze chamber Temp. Range -1°C to - 30°C. Pro-Environment Refrigeration, a rapid refrigeration mode, LED Screen to display data such as sample travel, section thickness and temperature. Easy to operate control panel for temp. and time.   Also Look for MICROTOME SEMI AUTOMATIC MICROTOME

Optics Technology semi automatic microtome which is the most advanced sectioning equipment for medical colleges, universities, research laboratories, hospitals and educational institutes at an impressive price / performance ratio and leaves nothing to be desired of in its class. Motorized advanced and retract keys allow for smooth, precise positioning of the microtome chuck to the blade holder.     Also Look for MICROTOME SEMI AUTOMATIC CRYOSTATIC MICROTOME

Shoe Cover Dispenser covers the user's foot with a sanitary cover to effectively keep the indoor floor clean. No need to change shoes anymore. It is ideal for Food, Pharma, Biotech, hospital, clinic, show room etc. Easy to usage : Shoe covers can be added very quickly. Besides, you can add shoe covers any time you want by just checking through a window. Fast : There is no delay at all between each usage. No noise : There is very little noise during the usage.   Also Looks for AUTOMATIC SHOE COVER DISPENSER

Wooden Microscope Slide Storage Cabinet is the ideal storage unit for collection of prepared microscope slides. Slides are held flat in removable, compartmented wooden trays each drawer has index card and puller knobs.  

This is a heating block unit with provision for different slides at a time. Temperature Range being Amb. +5°C to 250°C within ± 1% accuracy with uniformity of temperature. These are fitted with microprocessor based PID Temperature controller. NOTE: ANY NON STANDARD SIZE AVAILABLE

The complete soxhlet apparatus consists of solvent reservoir extraction assembly with 3/6 extraction places of various diameter to suit 100ml flasks to 250ml flasks and built in steam generator. Complete with stand, clamp holder soxhlet extraction (condenser) glass and extraction flask of 60 ml volume. Temp. range 50°C to 350°C. Controlled by Sunvic energy regulator. Body is made of Mild Steel Duly Powder Coated/S.S. 304.

The “Optics Technology” Spectro Polishing Machine is a specialized circular disk Grinder devised with specialized application of preparing the surface of the samples required to be tested on the Optical Emission Spectrometer for the generation of the chemical composition of the material of specific grade.

Optional : Advance Professional PC Software UV Range spectrophotometers are also available in Microprocessor based models of  UV/VIS range spectrophotometers are also available.

“Optics Technology” has designed spot extractor of superior quality material suitable for removing air borne contaminates and keep the work place safety from harmful fumes with flexible arms and can be moved around freely. Specification: Made of poly propylene Assembled with pivot joint Can revolve free and easy move Easy to clean   Application: Chemical labs Research center Pharmaceutical labs Chemical industry

Are used widely for doing quick & correct testing of tension & compression test of the spring. Features: Excellence performance Precisely designed Maintenance free    

(DOUBLE WALLED) Inner S.S. 304 and Outer M.S. Duly Powder Coated / S.S. 304 Gap between the walls is filled with special PUF Insulation. Temp. & Humidity is controlled by Digital Temp. & Humidity Controller and Digital Volt Meter. Temp. from 5ºC to 60ºC ± 1ºC & humidity is created in a S.S. water Reservoir fitted at the back to provide Atmospheric Humidity upto 95%±3% RH. Optional : Microprocessor based Temp. & Humidity Controller Microprocessor based Touch Screen Display System 21 CFR Software (For Non Editable Data)

For maintaining the temperature of critical biological specimens at desired level during microscopic observation. An anodized aluminum plate of less than 10 mm thickness with 50 mm central grove with glass which fits on most microscope stages Heated at desired temperature by a separate digital temperature display - cum controller with 2 meter long cable for convenient location. The temperature range is from ambient to 55°C with 0.2°C accuracy.   Also Looks for TEST TUBE WARMER

It can withstand harsh environments condition, making it is a reliable choice for long term use.

Superior quality steel is used for manufacturing offer range of mixing tank S.S tanks are manufactured by us for various industries like pharma, chemical, agricultural, food processing etc.     Note : Available in different Capacities.

Made up of 304 Steel Grayed Heavy Duty Easy to carry one place to another place, light weight

For testing penetration in grease/ creams. It consists of a vertical pillar mounted on a base, the head, together with diameter plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height. The dial graduate from 0 to 400 in 1/10 millimeter subdivisions. Supplied with a penetration needle, ring weights and two sample containers with Digital Timer.

Hand held digital starch refractometer with easy to read LCD Display.

The pass box is an equipment normally installed on the wall between the clean room and any other room. It is used for transfer the material from any room to clean room or viceversa, without contaminating the air of clean room and without having to open room door. This is achieved with the help of interlocking type doors of pass box. Construction: Body is made of Wooden / M.S. Duly Powder Coated / S.S. 304. Each hinged door has wide glass viewing window, through which material kept in the pass box can be seen. These doors are electronically interlocked type, so only one door can be opened at a  time. U.V. Light & fluorescent light is provided in the chamber.     OR ANY NON STANDARD SIZE.   Also Looks for DYNAMIC PASS BOX

Steam Jacketed Kettle that is widely used in pharma, food and various industries. This kettle is widely appreciated for its sturdy finish. Further, to meet the diversified demands of our esteemed clients. Latest technology in conformity with the international quality standards. Acknowledged for their precise dimension, high strength, abrasion resistance, easy usage, low maintenance and compact design. The inner surface of kettle is driven by attached geared motor or gear box motor attachment. The scraper attachment ensures that there is no blackening or charring of product white cooking or heating using SS-304. Optional : Motor and geared box system

Sterility testing is required to ensure viable contaminating microorganisms are not evident in a product. Unit is made of S.S. 316 with SS Valve. For excellent chemical resistance and can be fastly sterilized by flame, steam, and oven. We provide a fully leak Proof Platform. Light Weight to handle. Without Vacuum Pump and Without filter paper.    

Is a container which holds medical instruments during sterilization and preserves their sterility until they are removed. Provided with Lid

Multi-Layered Sticky mats effectively capture containment particles from foot traffic and wheels before entering a critical environment. The sticky mats are composed of 30 easy to peel-off disposable sticky mat sheets which are especially designed to meet clean room needs and are suitable for microelectronics, pharmaceutical, medical, aerospace, food processing & packaging Industries.     Numbered layers to prevent wastage and enable tracking of remaining sheets

    Also Looks for DIGITAL STOPWATCH

Mainly use for pharmaceutical and medical practice

Triple Walled Working up to 22 PSI to 25 PSI, Working Temp. 121ºC to 134°C. The inner chamber is made of thick Stainless Steel 304, with the steam stock facility. The outer body is made of thick Stainless Steel 304 / M.S. Duly Powder-Coated body, chamber is absolutely Leak Proof Chamber. Fitted with Digital Temp. Controller cum Timer. It is provided with pressure gauge, pressure release valve, Pressure Stat, Safety Valve, With water Level indicator with cord, Plug, Pressure Control Switch, S.S. Lid, Safety Valve for jacket & Dead Weight With wing nut System, With Water Level cut-off device for safety of Heaters.               Optional: Vacuum Breaker Valve Calibration Port Safety Alarm 21 CFR Software (Only with touch screen model) Automatic System OR Microprocessor Based Automatic Touch Screen Display system with Data Logging  

The apparatus is designed to determine the abrasion rate and impact hardness of tablets. One/Two transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating. (Body is made of M.S. Duly Powder Coated / S.S. 304). Special Features: Realistic abrasion rate is obtained by pre-set revolutions through a pilot lamp as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time.   Optional: Spare Drum Digital Revolution Counter.   Also Looks for DIGITAL FRIABILITY TEST APPARATUS

A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip. The instrument offers accurate and reproducible result much faster other conventional hardness tester.   Also Looks for TABLET HARDNESS TESTER (PFIZER TYPE)

A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip. The instrument offers accurate and reproducible result much faster other conventional hardness tester.   Also Looks for TABLET HARDNESS TESTER (MONSANTO TYPE)

Optional : Spare Dia & Punch   Also Look for  TABLET MAKING MACHINE (MOTORISED) ROTARY TABLET MACHINE

SINGLE PUNCH Built on heavy cast iron body with a stainless steel hopper on top and connected by a rubber tube working on 220V AC and single phase. Automatic compression and ejection device with each revolution of the wheel drive. Size of Punch & Dia is 12-13mm. Punch & Dia set made of stainless steel. Provided only 1 No. Dia & Punch along with the machine.   Optional : Spare Dia & Punch   Also Look for  TABLET MAKING MACHINE (HAND OPERATED) ROTARY TABLET MACHINE

Single point manual calibration   Also Look for DIGITAL TDS METER MICROPROCESSOR BASED TDS METER DIGITAL CONDUCTIVITY AND TDS METER COMBINED

Digital units include built-in temperature sensing probe Compact design saves valuable bench space. Stainless Steel body construction ensures durability. Digital units utilize a Digital Temperature Controller and easy-to-read LED display for accurate and reproducible temperature control. Can hold 15ml test tube.   Also Looks for STAGE WARMING

The Thin Layer applicator gives dependable service in drawing thin uniform layer variables from 0 to 2 mm. (Minimum thickness attainable 0.1 mm.) Accurate design and skilled workmanship of the applicator gives no trouble in coating several plates at a time. It is made up of Aluminium finished in proper shape. Applicator: Drawing Board, Drying Rack, Spotting Guide, Developing Chamber, Glass Pipette, Silica Gel, Glass Plates & Glass Jar.

Mainly for separation of marc of herbs and extract solvent by pressing method the unit provide with outlet valve the valve assembly is mounted on heavy MS body.

Tissue Culture Caster Rack that is high on demand in the markets. Superior quality, durability, minimal maintenance and sturdy construction are synonyms to the range of Tissue Culture Caster Rack provided by us. Further more this Tissue Culture Caster Rack is made available to the customers highly competitive prices. (Body is Made of M.S. Duly powder coated. Size: 48" x 18" x 13") Note: S.S. Body is Available on Request. Optional : Photoperiodic Timer

  Optional: Microprocessor based PID Controller

Used in pharmaceuticals, chemicals, dyes and food industries for various heating and drying applications. Sizes ranges from 6 to 96 trays with heating upto 200°C. Electrically operated tray dryer is with double walled construction inner S.S. & outer made of M.S. body duly powder coated / S.S. 304. All the trays are made of S.S. 304. It is provided with glass wool insulation through out the chamber fitted with electrical motor with fan with pillow block bearings. Temp. Controlled By Microprocessor Based PID Controller & AIR Circulating Fan For Uniform Temperature. Optional : Digital Timer Microprocessor Based Touch Screen Display System with Pen Drive for Data Logging, Printing Through PC Communication and saving of Data in PC 21 CFR Software (for Non-Editable Data)   Also Looks for VACUUM TRAY DRYER (RECTANGULAR)